TowerBall™ is available for pre-order. Subscribe here to get $25 OFF. Subscribe to get $25 OFF your pre-order.

Setup & Breakdown

Download Game Guide

What's Included

  • Collapsible 4-sided tower
  • Backpack storage bag
  • Four (4) green soft-touch balls
  • Four (4) blue soft-touch balls

Step 1

Position Panels 1 and 2 so that the hexagonal pattern is facing inward and the male connectors on the right side of Panel 1 line up with the interior slots on the left side of Panel 2.

Step 2

Press the male connectors on Panel 1 into the slots on Panel 2, then slide Panel 2 down so that the tops of the panels line up.

Step 3

Repeat steps 1 and 2 to connect Panels 2 and 3.

Step 4

Repeat steps 1 and 2 to connect Panels 3 and 4.

Step 5

Complete the tower by lining up the male connectors on Panel 1 with the inner rectangular slots in Panel 4 and sliding Panel 4 down so that the tower is square. Note: You will need to bend the tower slightly when lining up the connection points. That’s okay as the panels have a little flexibility.

Step 6

Place the tower in your play area, with at least 10 feet of free space in one direction.

Download Game Guide

Step 1

One corner at a time, disconnect the panels by carefully sliding the connection notches up so that they can be released through the rectangular slots.
*Pull up on the panels without a handle and push down on the panels with a handle.

Step 2

Once all panels have been detached, stack them so that hexagonal panel interiors are facing each other (important to avoid scratching the front side of panels).

Step 3

Insert the stacked tower panels inside the carrying bag and zip the bag shut for simple transport and storage. Don’t forget to throw the balls in, too!